Propagation of Gaussian beams in free space

2D quadridirectional mode expansion simulations
of configurations with the following specification:
A homogeneous medium with refractive index *n* = 1.0,
covered by a computational window of width
*w* = 15.1 µm; calculations for a vacuum wavelength of
1.0 µm and for TE polarization, i.e. *E _{y}*
is the single nonvanishing component of the electrical field.

For the QUEP simulations the field is discretized by 150 Fourier components along both coordinate axes. The figures in the table below lead to illustrations of the stationary electric field that is generated by inserting single Gaussian beams, or superpositions of these, respectively.

In simulations (0) - (3), beams of a width of 4µm are launched
at a tilt angle of 10^{o} from the left edge (0), the bottom edge (1),
and simultaneously from the top and from the right edges (2) or
from all four edges (3) into the interiour of the computational window,
in each case with an initial offset of 2µm with respect to
the center of the window.

For configurations (4) - (6), the tilt angle of the now initially centered
beams is increased to 45^{o} such that the rays leave the
computational window on the upper or lower horizontal edge, while they are
excited on the right (4) or left and right edge (5), (6) of the
computational domain.

Simulations (7) and (8) show the spreading of centered, upwards
traveling narrower beams with initial widths 1µm (7) and 0.2µm (8).
The animation (9) illustrates corner effects: Here a beam of width
4µm is excited
on the top edge with a larger tilt angle of 30^{o} and
an offset of 1µm, such that it directly hits the lower right
corner of the computational window.